NEC X552S Users Manual - Page 11
Attaching optional external speaker X462S/X552S
View all NEC X552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English 8. Attaching optional external speaker (X462S/X552S) Follow these steps to connect to the speaker to the monitor. 1. Turn off the power to the monitor. 2. Remove the handles on the back of the monitor (There are two handles). NOTE: Do not use the handles and screws removed here when connecting the speakers. 3. Align each bracket with its holders and attach the brackets and holders to the back of the monitor using the flat head screws* (A, C, D, F). Next, attach the pads* to cover the holders (E). NOTE: Use ONLY the flat head screws included in the speakers to avoid damage to the monitor. 4. Attach the speakers to the holders using the pan head screws* (B). 5. Once the speakers are attached to the monitor, connect the speaker and the monitor. *: included in speaker. A. Flat head screw B. Pan head screw C. Mounting bracket D. Holder E. Pad F. Screw hole NOTE: NOTE: Do not use devices other than specified. Use the SP-RM1 for the X462S and the X552S. For more information, please refer to the SP-RM1 Quick Start Guide. English-9