NEC X552S Users Manual - Page 18

Connections NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Solid lines = video signal Dotted lines = audio signal Stereo Amplifier DVD player with HDMI out DVD player Second monitor* Computer (Analog) Computer (Digital) VCR or DVD Player *: Multiple monitors that are daisy-chained have a limit to the connectable monitors. DVD player with SCART OUT Connected equipment Connecting terminal DVI (DVI-D) HDMI VGA (D-Sub) +VIDEO1 AV VIDEO1 (BNC) VGA (D-Sub) VGA (D-Sub) VGA (D-Sub) VGA (D-Sub) PC DVI (DVI-D) DisplayPort HDMI *1: depend on signal type. Setting in Terminal Mode DVI MODE: DVI-HD RAW/EXPAND*1 D-SUB MODE: SCART - D-SUB MODE: S-VIDEO D-SUB MODE: VIDEO D-SUB MODE: COMPONENT DVI MODE: DVI-PC RAW/EXPAND*1 Input signal name DVI HDMI SCART VIDEO1 S-VIDEO VIDEO2 DVD/HD2 VGA DVI DPORT HDMI Connecting Audio terminal AUDIO IN1 HDMI AUDIO IN1 AUDIO IN1 AUDIO IN1 AUDIO IN1 AUDIO IN1 AUDIO IN1 AUDIO IN1 DPORT HDMI Input button in remote control DVI HDMI DVD/HD VIDEO S-VIDEO VIDEO DVD/HD VGA DVI DISPLAYPORT HDMI English-16