NEC X552S Users Manual - Page 30
English-28, Schedule Settings, Date & Time, Aspect In Pip, Sub Input In Pip, Language
View all NEC X552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
OVER SCAN HDMI, DVD/HD, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only ON OFF OPTION SETTING OPTION POWER AUDIO INTERNAL PC OFF WARNING AUTO OFF START UP PC FORCE QUIT 120Hz (not adjustable) TOUCH PANEL (not adjustable) RESET FACTORY RESET Some video formats may require different scanning modes in order to best display the image. Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the image will be shown on the screen. Image size stays within the display area. The whole image is displayed on the screen. NOTE: When you use a computer with HDMI out, please set "OFF". You can set this setting when option board accessory is connected to the monitor. Please contact your supplier for detailed information about Option board slot accessories. Allow the monitor to supply power to Option board slot during power save mode or standby mode. The function is available for slot 2 type PC. Selects sound input signal. To activate DIGITAL, select OPTION(D) for input signal and OPTION for AUDIO INPUT. NOTE: DIGITAL is activated only when OPTION(D) is selected for input signal and OPTION for AUDIO INPUT. The function is available for slot 2 type PC. If OPTION POWER is OFF, a warning message appears when monitor power is turned off. Note: Warning message does not appear when monitor power is turned off by OFF TIMER setting or SCHEDULE setting. Monitor power is automatically "OFF" when connected PC is OFF or the monitor is in power save mode. When ON is selected, connected PC start-up. When ON is selected, it performs force-quit PC. Resets the following settings within the ADVANCED OPTION menu back to factory setting: INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING, DEINTERLACE, COLOR SYSTEM, OVER SCAN, AUDIO in OPTION SETTING, START UP PC in OPTION SETTING and FORCE QUIT in OPTION SETTING. Resets OSD options back to factory settings EXCEPT FOR: PICTURE MODE, VOLUME, SCHEDULE SETTINGS, DATE & TIME, ASPECT in PIP, SUB INPUT in PIP, LANGUAGE, LAN SETTING, TILE MATRIX MEM, OSD ROTATION, CHANGE SECURITY PASSWORD and SECURITY. ON OFF ANALOG OFF OFF NO NO - - English-28