NEC X552S Users Manual - Page 21

English Power Indicator Mode Status Indicator Light Power ON Green*1 Power OFF Red Power consumption under 0.5 W Power Save Amber Power consumption under 1 W*2 Power Standby when "SCHEDULE Green and Amber blink alternately SETTINGS" enabled Diagnosis (Detecting failure) Red Blinking (See Troubleshooting page 39) *1 If "OFF" is selected in POWER INDICATOR (page 25), the LED will not light when the LCD monitor is in active mode. *2 Without any option, with factory settings, VGA input only. Using Power Management The LCD monitor follows the VESA approved DPM Display Power Management function. The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period. The power management feature on your new display has been set to the "ON" mode. This allows your display to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the display. NOTE: Depending on the PC and video card used, this function may not operate. NOTE: It takes about 10 minutes for the monitor to go into power management mode when using DVD/HD, SCART, VIDEO1, VIDEO2 and S-VIDEO. Selecting a video source To view a video source: Use the input button to set [VIDEO1], [VIDEO2], [S-VIDEO]. Use the COLOR SYSTEM menu to set [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format. Picture Aspect DVI, VGA, DPORT FULL 1:1 ZOOM NORMAL HDMI, DVD/HD, SCART, VIDEO1, VIDEO2, S-VIDEO FULL WIDE DYNAMIC 1:1 ZOOM NORMAL Aspect ratio of image Unchanged view*3 Recommended selection for picture aspect*3 NORMAL 4:3 DYNAMIC Squeeze FULL Letterbox WIDE *3 Grey areas indicate unused portions of the screen. NORMAL: Displays the aspect ratio the same as it is sent from the source. FULL: Fills entire screen. WIDE: Expands a 16:9 letter box signal to fill entire screen. DYNAMIC: Expands a 4:3 pictures to fill the entire screen with non-linearity. Some of the outside image area will be cut off due to expansion. 1:1: Displays the image in a 1 by 1 pixel format. ZOOM The image can be expanded beyond the active display area. The image which is outside of active display area is not shown. ZOOM ZOOM English-19