Navigon 10000250 User Manual - Page 17
Device not mounted
UPC - 898110001327
View all Navigon 10000250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
User's manual maps + more Using the NAVIGON Fresh software you can install a function which allows you to select the picture you want to use as the screensaver. NAVIGON Fresh can be downloaded free of charge from the website www.navigon.com/fresh. The date, the time and the outdoor temperature are shown likewise on the picture which you selected yourself. For more details refer to the chapter "Background for the screensaver" on page 117. Switching off the screensaver ► Press briefly on the (On/Off) key. - or - ► Tap anywhere on the screen. The screensaver is phased out. The window which was active when the screensaver was switched on is visible again. Note: The screensaver is also switched off automatically when you pull out the ignition key. 3.1.3 3.1.4 3.2 3.2.1 Switching the device to standby mode When you pull out the ignition key, a message will appear shortly afterwards telling you that the device is being switched to standby mode. ► Tap on Standby or wait for the device to go out on its own. Switching off the device When the device is mounted in the vehicle, it does not need to be switched off. However, if you are not going to use the device for a longer period of time, you can switch it off all the same. ► Press the (On/Off) key and keep it pressed until the device switches off (approx. 5 seconds). Device not mounted Of course you can also switch the device on and off when it is not mounted in the vehicle. Switching on the device ► Press the (On/Off) key and keep it pressed until the device switches on. If the navigation device was previously set to standby, the window which was last visible will appear. Switching the navigation device on and off - 17 -