Netgear FSM7326P FSM7326P User Manual - Page 121
config radius maxretransmit, config radius timeout, config radius accounting mode
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software config radius maxretransmit This command sets the maximum number of times a request packet is retransmitted when no response is received from the RADIUS server. The maxretransmit value is an integer in the range of 1 and 15. Consideration to maximum delay time should be given when configuring RADIUS maxretransmit and RADIUS timeout. If multiple RADIUS servers are configured, the max retransmit value on each will be exhausted before the next server is attempted. A retransmit will not occur until the configured timeout value on that server has passed without a response from the RADIUS server. Therefore, the maximum delay in receiving a response from the RADIUS application equals the sum of (retransmit times timeout) for all configured servers. If the RADIUS request was generated by a user login attempt, all user interfaces will be blocked until the RADIUS application returns a response. Default Format 4 config radius maxretransmit config radius timeout This command sets the timeout value (in seconds) after which a request must be retransmitted to the radius server if no response is received. The timeout value is an integer in the range of 1 and 30. Consideration to maximum delay time should be given when configuring RADIUS maxretransmit and RADIUS timeout. If multiple RADIUS servers are configured, the max retransmit value on each will be exhausted before the next server is attempted. A retransmit will not occur until the configured timeout value on that server has passed without a response from the RADIUS server. Therefore, the maximum delay in receiving a response from the RADIUS application equals the sum of (retransmit times timeout) for all configured servers. If the RADIUS request was generated by a user login attempt, all user interfaces will be blocked until the RADIUS application returns a response. Default Format 5 config radius timeout config radius accounting mode This command enables or disables the RADIUS accounting function. Default disable Switching Commands 202-10009-01 7-59