Netgear FSM7326P FSM7326P User Manual - Page 153
config router id, RIP Commands, show router rip info, show router rip interface detailed
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software config router id This command sets a 4-digit dotted-decimal number uniquely identifying the router. To ensure uniqueness, it defaults to the value of the switch's management IP address. If this value is not configured, then the value of any active router interface IP address is used. Format config router id RIP Commands show router rip info This command displays information relevant to the RIP router. Format Router ID RIP Admin Mode Global Route Changes Global queries show router rip info A 32 bit dotted decimal number representing the interface. RIP administrative mode of router RIP operation; enable activates and disable de-activates the RIP ability for the switch. This is a configured value. The number of route changes made by RIP to the IP Route Database. The number of responses sent to RIP queries from other systems. show router rip interface detailed This command displays information related to a particular RIP interface. Format Interface IP Address Send version Receive version RIP Admin Mode Link State Authentication Type Authentication Key show router rip interface detailed The unit slot.port identifying each interface. This is a configured value. The IP source address used by the specified RIP interface. This is a configured value. The RIP version(s) used when sending updates on the specified interface. The types are none, RIP-1, RIP-1c, RIP-2. This is a configured value. The RIP version(s) allowed when receiving updates from the specified interface. The types are none, RIP-1, RIP-2, Both. This is a configured value. RIP administrative mode of router RIP operation; enable activates, disable deactivates it. This is a configured value. Indicates whether the RIP interface is up or down. This is a configured value. The RIP Authentication Type for the specified interface. The types are none and simple. This is a configured value. The RIP Authentication Key for the specified interface. The actual key will be **** to avoid compromising privacy. This is a configured value. Routing Commands 202-10009-01 8-11