Netgear FSM7326P FSM7326P User Manual - Page 91
show vlan summary, show vlan detailed, This command displays a list of all con d VLANs.
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software The mode is one of the following: 802.1d fast off IEEE 802.1D-compliant STP mode is used. Fast STP mode is used. STP is turned off. show vlan summary This command displays a list of all configured VLANs. Format VLAN ID VLAN Name VLAN Type show vlan summary There is a VLAN Identifier (VID) associated with each VLAN. The range of the VLAN ID is 1 to 4094. A string associated with this VLAN as a convenience. It can be up to 16 alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 always has a name of `Default`. This field is optional. What type of VLAN this is. A VLAN can be the Default VLAN, (VLAN ID = 1), a static VLAN, one that is configured and permanently defined, or a Dynamic VLAN, one that is created by GVRP registration. In order to change a VLAN from Dynamic to Static, select Static from the Vlan Type pull-down entry field. Once the VLAN is selected, click on Submit. This will change the VLAN type to Static. show vlan detailed This command displays detailed information, including interface information, for a specific VLAN. Format VLAN ID VLAN Name VLAN Type Slot.Port config vlan detailed , where the ID is a valid VLAN identification number There is a VLAN Identifier (VID) associated with each VLAN. The range of the VLAN ID is 1 to 4094. A string associated with this VLAN as a convenience. It can be up to 16 alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 always has a name of `Default`. This field is optional. What type of VLAN this is. A VLAN can be the Default VLAN, (VLAN ID = 1), a static VLAN, one that is configured and permanently defined, or a Dynamic VLAN, one that is created by GVRP registration. In order to change a VLAN from Dynamic to Static, select Static from the Vlan Type pull-down entry field. Once the VLAN is selected, click on Submit. This will change the VLAN type to Static. Indicates by slot id and port number which port is controlled by the fields on this line. It is possible to set the parameters for all ports by using the selectors on the top line. Switching Commands 202-10009-01 7-29