Netgear FSM7326P FSM7326P User Manual - Page 98
config garp gmrp adminmode, config garp gmrp interface mode
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Leave Timer LeaveAll Timer Port GMRP Mode Port GVRP Mode participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds). Specifies the period of time to wait after receiving an unregistered request for an attribute before deleting the attribute. Current attributes are a VLAN or multicast group. This may be considered a buffer time for another station to assert registration for the same attribute in order to maintain uninterrupted service. There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds). This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order to maintain registration. There is an instance of this timer on a per-Port, per-GARP participant basis. The Leave All Period Timer is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000 centiseconds (10 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds). Indicates the GMRP administrative mode for the port. It may be enabled or disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory default is disabled. Indicates the GVRP administrative mode for the port. It may be enabled or disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory default is disabled. config garp gmrp adminmode This command enables or disables GARP Multicast Registration Protocol (GMRP) on the system. The default value is disable. Format config garp gmrp adminmode config garp gmrp interface mode This command enables or disables GARP Multicast Registration Protocol on a selected interface. The parameter identifies the interface on which to configure the mode. If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a LAG, GARP functionality will be disabled on that interface. GARP functionality will subsequently be reenabled if routing is disabled and LAG membership is removed from an interface that has GARP enabled. Default Format disable config garp gmrp interface mode 7-36 202-10009-01 Switching Commands