Netgear PS101 Reference Manual - Page 110
TCP/IP Tab
UPC - 606449023442
View all Netgear PS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
NetGear Print Server Manual Protocol computers. The factory default is enable. TCP/IP Tab This tab allows configuration for the TCP/IP network protocol.. For further information about TCP/IP, refer to Chapter Figure 8-5 TCP/IP Tab Window TCP/IP Tab Fields Field Description DHCP This field allows you to enable or disable the print server's ability to get its IP address from a DHCP (Dynamic Host Configuration Protocol) server. When disabled, you can provide a fixed IP address in the following fields. IP Address This IP address is assigned to the print server. If you have a private LAN and do not plan to connect to the TCP/IP-based internet, NETGEAR recommends that you use the address from the IETP-designated private addresses (for example, 192.168.x.x or 10.x.x.x). 101