Netgear PS101 Reference Manual - Page 68
been con d.
UPC - 606449023442
View all Netgear PS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
NetGear Print Server Manual 6. Compare the IP address to MAC address association to assure that an IP address has been assigned, using the ping command: ping NAME NAME is the name of the print server. You should receive a response. If you get a timeout message, the BootP procedure has failed. You can either follow the steps again for using BootP or use one of the other methods for assigning an IP address. 7. Proceed to "Configuring Your Print Server Using FTP" to configure the print server, if it has not yet been configured. 59
NetGear Print Server Manual
59
6.
Compare the IP address to MAC address association to assure that an IP address has been assigned,
using the ping command:
ping NAME
NAME is the name of the print server. You should receive a response. If you get a timeout message, the
BootP procedure has failed. You can either follow the steps again for using BootP or use one of the other
methods for assigning an IP address.
7.
Proceed to “Configuring Your Print Server Using FTP” to configure the print server, if it has not yet
been configured.