Netgear PS101 Reference Manual - Page 92
access the print server using NetWare commands printing to the designated queue or printer.
UPC - 606449023442
View all Netgear PS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
NetGear Print Server Manual If the NetWare print server to which the NETGEAR print server will be connected has been previously loaded, you must unload and reload it again. If you are unloading and reloading the PSERVER NetWare Loadable Module (NLM), start with step a. If you are loading the NLM for the first time, go to step d. To load the NetWare PSERVER module: a. Go to the file server console where the PSERVER.NLM is running. b. Press [Alt] + [Esc] until the print server NLM window opens. c. Press [Esc] to stop the print server NLM and answer Yes. d. Enter the following command when the NetWare NLM has been unloaded: load pserver xxxx xxxx is the same NetWare print server entered in steps 3 c and 6 f. Your print server is now set up as a remote printer in the NetWare networking environment. You can access the print server using NetWare commands printing to the designated queue or printer. 83