Netgear PS101 Reference Manual - Page 83
PSTool Utility CONFIG File Format
UPC - 606449023442
View all Netgear PS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
NetGear Print Server Manual 6-4 PSTool Utility CONFIG File Format The entries of the config file are listed and described in table 7.1. This example is for the 3 port model of the NETGEAR Print Server. PSTool Utility Config File Entries Entry inConfig File Description begin CMD Do not change this line. Replace xxxxxxxx with the desired device name. The Device Name will initially be the Default Server 0001 Device Name: Name. The Default Server Name is shown on a sticker on the base of the device. The Device Name can xxxxxxxx be changed, but the new name must not exceed 16 characters in length The default value "*" allows all AppleTalk zones to access the Print Server's printers. To restrict access 3000 Apple Zone: * to a particular zone, replace the * with the desired zone name. 3101 AP_PCOMM1: No 3102 AP_PCOMM2: No 3104 AP_PCOMM3: These settings determine whether the port uses ASCII or Binary Communication Protocol. Enter No for ASCII or Yes for Binary. The lines corresponds to port 1, 2 and 3 of the print server. Binary communication is twice as fast as ASCII ASCII communication is more reliable The computer, Print Server and printer MUST all be configured to use the SAME protocol. 9002 Do not change this line. Note: NETGEAR does not support PS101 Print Server for AppleTalk printing environment. 74