Netgear PTVU1000 PTVU1000 User Guide - Page 31
Supported Resolutions, The Universal Push2TV HD TV Adapter Does Not Turn - wireless pc to tv
View all Netgear PTVU1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Push2TV HD Adapter Supported Resolutions Problem/Question: I have a full HD TV, but I cannot set the screen resolution on it to 1920 x 1080, which is the native resolution of this TV. Answer: The maximum screen resolution supported by the product is 1080p (1920 x 1080). However, in Mirror mode you are limited by the maximum resolution of your PC. Therefore, you need to change the mode to Extend mode, as described in Configuring the Display on page 22. The Universal Push2TV HD TV Adapter Does Not Turn On Problem/Question: The Universal Push2TV HD TV Adapter does not turn on. Symptom: No picture is displayed on the wirelessly connected screen/TV. Solution: Make sure the power cord is correctly connected to the base. Verify that the TV is set to the correct input (for example, HDMI1). This is done using the remote control of the TV. Additionally, follow the steps in the Installation Guide for hardware and software installation, and see Configuring the Display on page 22. The Universal Push2TV HD TV Adapter Shows a "Ready to Connect" Message Problem/Question: The Wireless Laptop to Home Cinema shows a "Ready to Connect" message. Symptom: A standard message is displayed on the wirelessly connected screen or TV. Solution: See Configuring the Display on page 22. Additionally, follow the steps in the Installation Guide for hardware and software installation. 31