NordicTrack Cxt1400 Uk Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 28 and 29. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled. Star Washer M8 Split (112)-8 Washer (90)-6 Wave Washer (111)-2 M8 Washer (88)-6 M8 Jamnut (79)-7 M10 Nylon Locknut (81)-2 M4 x 14mm Screw (104)-8 M4 x 16mm Round Head Screw (101)-8 M4 x 32mm Round Head Screw (105)-6 M4 x 45mm Screw (108)-2 Hub Screw (87)-8 M8 x 23mm Shoulder Screw (115)-4 M8 x 23mm Button Screw (84)-7 M8 x 43mm Button Bolt (78)-4 M8 x 69mm Button Bolt (80)-1 M10 x 80mm Carriage Bolt (82)-2 M10 x 127mm Button Screw (83)-2 M8 x 112mm Button Bolt (123)-2 5