NordicTrack Cxt1400 Uk Manual - Page 9
Axle. Then, slide an M8 Washer 88 and a Pedal Leg
View all NordicTrack Cxt1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
12. Identify the Left Pedal (13) and the Left Pedal Leg (14), which are marked with stickers. Attach the Left Pedal (13) to the Left Pedal Leg (14) with an M4 x 45mm Screw (108), three M4 x 14mm Screws (104), and four Star Washers (112). Attach the Right Pedal (not shown) to the Right Pedal Leg (not shown) in the same way. 13. Apply a light film of grease to a Pedal Leg Axle (32). Next, slide a 5mm Spacer (118) onto the Pedal Leg Axle. Then, slide an M8 Washer (88) and a Pedal Leg Cover (31) onto an M8 x 23mm Shoulder Screw (115), and finger tighten the Shoulder Screw into one end of the Pedal Leg Axle. Have another person hold the front end of the Left Pedal Leg (14) inside of the bracket on the Left Upper Body Arm (11). Insert the Pedal Leg Axle (32) into both parts; make sure that the 5mm Spacer (118) is inside of the bracket on the Left Upper Body Arm. Slide a 5mm Spacer (118) onto the other end of the Pedal Leg Axle (32). Next, slide an M8 Washer (88) and a Pedal Leg Cover (31) onto an M8 x 23mm Shoulder Screw (115), and finger tighten the Shoulder Screw into the Pedal Leg Axle. Then, tighten both Shoulder Screws. Repeat this step on the right side of the elliptical exerciser. 12 13 112 104 112 108 112 13 14 112 104 11 118 31 88 115 14 Bracket 32 88 115 31 118 Grease 14. Lift the latch on the underside of the Left Pedal Leg (14), and set the Left Pedal Leg on the left Crank 14 Bushing Sleeve (43). Release the lever, and make sure that the Left Pedal Leg is securely connected to the Crank Bushing Sleeve. Connect the Right Pedal Leg (not shown) in the same way. See step 5. Tighten the M8 x 69mm Button Bolt (80) and the two M8 x 23mm Button Screws (84). 14 Latch 43 15. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser. 9