NordicTrack E 7.1 Elliptical English Manual - Page 12
Orient the Rear Upright Cover 25 as shown.
View all NordicTrack E 7.1 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12. Untie and discard the wire tie attached to the Wire Harness (60). While a second person holds the Console (33) near the Upright (5), connect the wires on the Console to the Wire Harness (60) and to the Pulse Wires (105). Insert the excess wire downward into the Upright (5) or upward into the Console (33). Tip: Avoid pinching the wires. Finger tighten two M4 x 19mm Screws (156) through the Upright (5) into the upper end of the Console (33). Make sure to start the Screws into the indicated upper holes in the Console. Do not tighten the M4 x 19mm Screws (156) yet. You will tighten the Screws at the end of step 14. 12 33 13. Orient the Rear Upright Cover (25) as shown. 13 Attach the Rear Upright Cover (25) to the Upright (5) with four M4 x 19mm Screws (156). Tip: It may be necessary to bend the upper end of the Rear Upright Cover gently into place around the Upright. Avoid pinching the wires Upper Holes 105 60 156 5 156 25 5 12