NordicTrack E 7.1 Elliptical English Manual - Page 7

3. See drawing 3a. Identify and orient the Upright (5) and the Top Cover (27) as shown. 3a Slide the Top Cover (27) upward onto the Upright (5). Wire Tie Have a second person hold the Upright (5) and the Top Cover (27) near the Main Frame (1). Locate the wire tie in the Upright (5). Tie the lower end of the wire tie to the Wire Harness (60). Next, pull the upper end of the wire tie until the Wire Harness is routed through the Upright. Tip: To prevent the Wire Harness (60) from falling into the Upright (5), secure the Wire Harness with the wire tie. See drawing 3b. Tip: Avoid pinching the Wire Harness (60). Insert the Upright (5) into the Main Frame (1). Wire Tie 60 Attach the Upright (5) with four M8 x 16mm Patch Screws (102) and four M8 Split Washers (103); do not tighten the Patch Screws yet. Avoid pinching the Wire Harness (60) 5 27 1 3b 5 60 102 103 102 103 1 102 103 102 7