NordicTrack E400 Instruction Manual - Page 10
Identify the Right Upper Body Arm 6, orient
View all NordicTrack E400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
9. Slide an M12 Washer (38) onto an M10 x 80mm Shoulder Bolt (37). 9 While a second person holds the front end of the Right Pedal Arm (8) inside the bracket on the right Upper Body Leg (7), insert the M10 x 80mm Shoulder Bolt (37) through both parts. 98 Then, tighten an M10 Locknut (31) with an M10 Bright Washer (30) onto the end of the M10 x 80mm Shoulder Bolt (37). Repeat this step to attach the Left Pedal Arm (98) to the left Upper Body Leg (not shown). 31 30 8 7 38 37 10. Identify the Right Upper Body Arm (6), orient it as shown, and slide it onto the right Upper Body Leg (7). Attach the Right Upper Body Arm (6) with two M8 x 45mm Carriage Bolts (44), two M8 Small Curved Washers (43), and two M8 Locknuts (13). Repeat this step for the Left Upper Body Arm (97). See assembly step 5. Tighten the four M8 x 16mm Screws (53). Then, press the Lower Upright Cover (58) into place. 10 97 7 6 13 43 44 7 58 10