NordicTrack E400 Instruction Manual - Page 11

Press the Front and Rear Upright Covers

Page 11 highlights

11. While a second person holds the Handlebar (5) near the Upright (4), locate the Pulse Wires (55) 11 inside the Handlebar and route them through the Upright as shown. Tip: Avoid pinching the Pulse Wires (55). Attach the Handlebar (5) to the Upright (4) with four M8 x 16mm Screws (53) and four M8 Split Washers (18); start all the Screws, and then tighten them. 5 4 55 53 18 Avoid pinching the Pulse Wires (55) 12. Press the Front and Rear Upright Covers (51, 85) together around the Upright (4). Then, 12 attach them with two M4 x 18mm Screws (35). 51 35 85 4 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

11
11
55
53
18
5
4
12
11. While a second person holds the Handlebar (5)
near the Upright (4), locate the Pulse Wires (55)
inside the Handlebar and route them through the
Upright as shown.
Tip: Avoid pinching the Pulse Wires (55).
Attach the Handlebar (5) to the Upright (4) with
four M8 x 16mm Screws (53) and four M8 Split
Washers (18);
start all the Screws, and then
tighten them.
Avoid pinching the
Pulse Wires (55)
51
35
85
4
12. Press the Front and Rear Upright Covers
(51, 85) together around the Upright (4). Then,
attach them with two M4 x 18mm Screws (35).