NordicTrack Ebu Nt 9600 Bike Canadian English Manual - Page 22
While the words PRESS CHANNEL UP
View all NordicTrack Ebu Nt 9600 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
10 Press the ENTER AGE/WT. button again and program TV channels. The console has the capability to find and store in memory all of the valid TV channels in your area. While the words "PRESS CHANNEL UP TO SCAN" appear in the main display, press the CHANNEL + button to start the channel scanning process. The console will begin scanning all TV channels. If no broadcast signal is detected on a channel, the channel will be skipped; if a signal is detected, a tone will sound and the channel will be stored in memory. This process will continue until the highest channel is reached. The lowest channel stored in memory will then appear in the main display. channels or add channels. To delete or add a channel, first press the CHANNEL + and - buttons until the channel appears in the main display. To delete a channel, press the + or - button beside the ENTER AGE/WT. button so that the words "CHANNEL SAVED" do not appear next to the channel. To add a channel, press the + or - button so that the words "CHANNEL SAVED" appear next to the channel. Then, select the next channel that you want to delete or add. Repeat this process until you have deleted all unwanted channels and added all desired channels. 12 Hold down the ENTER AGE/WT. button and the CLEAR button simultaneously for a few seconds to exit the maintenance mode. 11 Press the ENTER AGE/WT. button again and delete or add TV channels. After all valid TV channels have been stored in the console's memory, you can delete unwanted To exit the maintenance mode at any time, hold down the ENTER AGE/WT. button and the CLEAR button simultaneously for a few seconds. 21