NordicTrack Gx 4.2 Pro Bike English Manual - Page 9
Note: The Locknuts, Split Washers, and, Washers may be preattached to the Seat.
View all NordicTrack Gx 4.2 Pro Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Orient the Seat (23) and the Seat Carriage (24) as shown. 7 Attach the Seat (23) to the Seat Carriage (24) with four M8 Locknuts (43), four M8 Split Washers (70), and four M8 Washers (64). Note: The Locknuts, Split Washers, and Washers may be preattached to the Seat. 8. Remove the Seat Knob (26) from the Seat Bracket (30) inside the Seat Carriage (24). 8 Next, set the Seat Carriage (24) on the Seat Post (6). Insert the Seat Knob (26) upward into the Seat Post, and tighten the Seat Knob into the Seat Bracket (30) inside the Seat Carriage. 23 24 64 70 43 30 24 6 26 9. While a second person holds the Console (13) near the Upright (4), connect the Main Wire 9 Harness (58) and the Receiver Wire Harness (59) to the matching wires on the Console. Next, insert the third wire on the Console (13) downward through the large opening in the Upright (4). Insert the excess wire into the Upright (4) or into the Console (13). 13 58 59 Wire 4 9