NordicTrack T17.2 Uk Manual - Page 10

7. Attach the left handrail assembly (B) to the Left Upright (89) with two 5/16" x 2 1/2" Screws (37) and two 5/16" Star Washers (11). Be careful not to pinch the Upright Wire (81). Start both Screws, but do not tighten them yet. Attach the right handrail assembly (C) in the same way. Note: There is no wire on the right side. Remove and discard the four indicated screws (D). 7 37 11 D B 89 81 37 C 11 D 8. Start four #10 x 3/4" Screws (9) with four #10 Star Washers (32) into the Pulse Bar (112) and the Handrails (87). Slide the Pulse Bar (112) as far in the direction shown as possible, and then tighten the #10 x 3/4" Screws (9). Do not overtighten the Screws. Remove the wire tie from the Upright Wire (81). Insert the pulse wire (E) from the Pulse Bar (112) through the looped Cable Tie (99) on the right handrail assembly (C). See step 7. Tighten all four 5/16" x 2 1/2" Screws (37). 8 Wire Tie 81 9 32 87 E 99 112 C 87 9 32 10