NordicTrack T17.2 Uk Manual - Page 11
Do not over, tighten the Screws.
View all NordicTrack T17.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the four indicated 1/4" x 1/2" Screws (4) from the Console Frame (104). These are used in a later step. Attach the Left and Right Cup Holders (36, 27) with eight #8 x 1/2" Screws (1). Do not overtighten the Screws. 9 1 4 36 1 1 27 1 104 4 Console Assembly 10. Remove the two #8 x 1 1/4" Screws (107) and slide the Left Handrail Cover (79) back about 10 1 in. The Screws will be reattached in a later step. Note: It is not necessary to move the Left Handrail Insert (84). 99 With the help of a second person, hold the console assembly near the left handrail assembly (B). Route the Upright Wire (81) around the back of the console assembly as shown, and insert the end of the Upright Wire through the indicated looped Cable Tie (99). 81 Console Assembly B 79 84 107 11