NordicTrack T17.2 Uk Manual - Page 19
How To Turn On The Power
View all NordicTrack T17.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
HOW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 17). Next, locate the power switch on the treadmill frame near the power cord. Press the power switch into the reset position. Reset If you press the Start button or the Speed increase button, the walking belt will begin to move at 2 Km/H. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press one of the buttons, the speed setting will change by 0.1 Km/H; if you hold down the button, the speed setting will change in increments of 0.5 Km/H. Note: After you press the button, it may take a moment for the walking belt to reach the selected speed setting. If you press one of the numbered 1 Step Speed buttons, the walking belt will gradually change speed until it reaches the selected speed setting. IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as you plug in the power cord and press the power switch into the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see THE INFORMATION MODE on page 24 to turn off the demo mode. Next, stand on the foot rails of the treadmill. Find the clip attached to the key Clip and slide the clip onto the waistband of your clothes. Then, insert the key into the console. After a moment, Key the displays will light. IMPORTANT: In an emer- gency, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the posi- tion of the clip. HOW TO USE THE MANUAL MODE To stop the walking belt, press the Stop button. The time will begin to flash in the display. To restart the walking belt, press the Start button or the Speed increase button. 4. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase or decrease button or one of the numbered 1 Step Incline buttons. Each time you press one of the buttons, the treadmill will gradually adjust to the selected incline setting. 5. Follow your progress with the displays. As you walk or run on the treadmill, the display can show the following workout information: ENTE•NT ELT11h44e7711e22lapsed time • The distance that you have walked or run • The workout intensity bar • The approximate number of calories you have burned 1. Insert the key into the console. • The incline level of the treadmill See HOW TO TURN ON THE POWER above. • The number of vertical feet you have climbed 2. Select the manual mode. • The speed of the walking belt If the manual mode is not selected, press the Manual Control button on the console. 3. Start the walking belt. • Your heart rate (see step 6 on page 20) • The matrix To start the walking belt, press the Start button, the Speed increase button, or one of the numbered 1 Step Speed buttons. 19