NordicTrack T17.2 Uk Manual - Page 8
See the inset drawing., Be careful not to dam, age the Upright Wire.
View all NordicTrack T17.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Pull the Upright Wire (81) and the base ground wire (A) through the indicated hole in the Base (94) using the plastic tie. Attach the base ground wire (A) to the Base (94) with a #8 x 1/2" Ground Screw (10). Press the Grommet (77) into the square hole in the Base (94). See the inset drawing. Cut the plastic tie near the Upright Wire (81). Be careful not to damage the Upright Wire. 3 Tie Square Hole 77 Hole 81 10 Tie Cut 81 A 94 4. Identify the Left Upright (89). Have a second person hold the Left Upright near the Base (94). 4 See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Upright Wire (81). Then, pull the other end of the wire tie until the Upright Wire is routed through the Left Upright. 89 81 89 Wire Tie Wire Tie 81 81 94 8