NordicTrack T17.2 Uk Manual - Page 13
If You Do Not Connect The Con
View all NordicTrack T17.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13. Set the Console (103) onto the Console Base (64). Make sure that none of the wires from the Console are pinched. Attach the Console (103) to the Console Base (64) with six #8 x 1/2" Screws (1). 13 103 Wires 64 1 1 1 1 14. Connect the ground wires (G), the 8-pin wires (F), the 10-pin wires (E), and the four speaker wires (H) from the Console (103). Note: The Upright Wire (81) has 8 pins, the pulse wire (E) has 10 pins, and the speaker wires (H) have 2 pins. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. After all of the wires are connected, pull the wires tight and tighten the Cable Ties (99) around the wires. Make sure that no wires are resting on any posts other than those with wire ties. Cut off the ends of the ties. 14 103 E G F 81 99 99 Console Wire 81 99 H 13