NordicTrack Walkfit 5500 Treadmill English Manual - Page 25
Adjust, Treadmill, Resistance
View all NordicTrack Walkfit 5500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Suggested Care Cleaning Lubricate the Treadmill Belt Every 12-15 Hours of Use Clean Drag Strap and Flywheel Every 3 Months Oil the UpperBody Exerciser %s Needed • rid •110 I • Date Cleaned Adjust the Treadmill Resistance the treadmill bell resistance becomes too loose. too tight or moves to one side. it can be adjusted. If the treadmill belt has moved so far to one side that you are unable to see the rear roller on that side. center it as follows: IMPORTANT: The two guides beneath the treadmill deck are designed to keep the belt centered. The belt is cut slightly wider than the space between the two guides, so it will curl down on each side. This is normal and will riot damage the treadmill belt. If the treadmill belt is too far to the left side of the treadmill deck, SUM(' on the left side of the machine. If the treadmill belt is too far to the right side of the treadmill deck, stand on [lie right side of the machine. 2. Ilse your fool [[he one nearest the ireadinill) I o rotate the treadmill belt several times. This will help center the bell. If the bell is still off-center or if it is too loose or too light, continue with the following steps. Otherwise, stop after step 2. IMPORTANT: Step 4 is intended to be a last step in treadmill maintenance. 4. Use the 3/1 6-inch Allen wrench provided on the adjustment bolts at the rear of the treadmill deck to Ellijusl the treadmill resistance (Figure 51, The treadmill is properly adjusted if you are able to slip your hand between the belt and the treadmill deck, Adjustment bolt Allen wrench Figure 5 To loosen or tighten the belt: • if the treadmill belt is too right. turn both aciju.stmenl bolts counterclockwise. Adjust. each boil equally it quarter turn al a time. • If the treadmill belt is too loose, tighter) ii by turning both bolls clockwise. Adji est each bolt equally a quarter turn al a time.