Oki B430d-beige smart PrintSuperVision Users Manual - Page 122
Communication Info], Configuring the Job Log Acquisition, Settings, SNMP Trap Port Number]
View all Oki B430d-beige manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
7. Registering and Managing Devices [Fees] Specify the fee registered in sPSV. Click [Billing Amount Settings] to create a new definition. For information on how to configure the settings, see "Changing Fee Charge Definitions" (P. 177). [Job Log Acquisition Status](*) The job log acquisition status of the device is displayed. [Assigned Group](*) The management groups to which the device belongs are displayed. Click [Management Group] to register a management group. For information on how to configure the settings, see "Management Group Registration" (P. 125). [Communication Info] Note Depending on the device, this may not be displayed. 4 Click [Apply]. 5 Click [OK] in the confirmation window. [Device Password] Enter an administrator password for the device (6-12 1-byte alphanumeric characters). [Apply the management group password] When the Management Group settings have been changed, select the password to use when communicating with the device. When this is checked, the [Device Password] specified in Management group is used. When this is unchecked, the [Device Password] specified on the device is used. [SNMP Read Community Name] Enter the SNMP read community name of the device (default: "public") (ASCII code, 0x20 - 0x7E, up to 128 characters) [SNMP Write Community Name] Enter the SNMP write community name of the device (default: Differs depending on the model.) (ASCII code, 0x20 - 0x7E, up to 128 characters) [SNMP Trap Port Number] Enter the SNMP Trap port number of the device. (default: "162") (1-65535 in single byte numbers) Configuring the Job Log Acquisition Settings Job logs are stored in the devices temporarily and acquired from devices according to a schedule set in sPSV. For details on job logs, see "12. Managing Job Logs" (P. 192). 1 Set the job log acquisition information in [Function Details] > [Manage] > [Device Management Settings] > [Device Settings]. 2 Select the device from which to acquire the job log in [Device]. 3 C lick in [Log/Access Control] to open the settings window. - 122 -