Oki B430d-beige smart PrintSuperVision Users Manual - Page 123
Record Job Log to Device], Job Log Acquisition Schedule, Settings], Set Access Controls
View all Oki B430d-beige manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
4 Configure the settings of the device. 7. Registering and Managing Devices 5 Click [Apply]. [Record Job Log to Device] Check this and click [Apply] for the device to start recording the log. Remove the check and click [Apply] for the device to stop recording the log. [Job Log Acquisition Schedule Settings] Set the schedule by which the job log is acquired. This is enabled when [Record Job Log to Device] is checked. [Specify Time] Acquired for each set interval. The maximum interval time that can be set is 24 hours. The default setting is set as an optimized value detected from the state of the added device. If the interval is set to a time that is longer than the default settings, some of the job logs may not be acquired. [Time specified] Set the specific time. Click [Specify Time] and add the time. Up to 24 acquisition times can be added. After adding, click [OK]. Note Always set a time when the computer where the sPSV is set up and device are both switched ON. The job log is not acquired if the power is not ON. If the device is printing or an error is occurring, the job log is not acquired. When the "Enter an administrator password for the device" window is displayed, open the [Device Info] input window, enter the administrator password for the device and click [Apply]. Note • Depending on the device, this may not be displayed. • For details on the device's factory set administrator password, see the User's Manual of the device. • If the device server ID is already set from a different server, a confirmation dialog box is displayed. • To change the setting, enter the Server ID. 6 Click [OK] in the confirmation window. Set Access Controls Check this check box when you want to activate access control for multifunction printers that have an access control function on the control panel. Note Users cannot be registered when the access control is disabled. 1 Set the job log acquisition information in [Function Details] > [Manage] > [Device Management Settings] > [Device Settings]. - 123 -