Oki B430d-beige smart PrintSuperVision Users Manual - Page 193
Record Job Log to Device
View all Oki B430d-beige manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
12. Managing Job Logs [Record Job Log to Device] The device starts recording the log when this is checked and the change is applied. The device stops recording the log when the check is removed and the change is applied. Memo • If the device server ID is already set from a different server, a confirmation dialog box is displayed. • To change the setting, enter the Server ID. • In some devices, the [Restrictions] (page 143) functions that can be used differ according to the check status of [Record Job Log to Device]. • In some devices, [Access Control] settings can be operated after changing the "Record Job Log to Device" check mark and clicking [Apply]. 6 Set the schedule by which the job log is acquired. [Specify Time] Acquired for each set interval. The maximum interval time that can be set is 24 hours. The default setting is set as an optimized value detected from the state of the added device. If the interval is set to a time that is longer than the default settings, some of the job logs may not be acquired. (Range: 1 to 24 hours) [Time specified] Set the specific time. Click [Specify Time] and add the time in 24-hour format. Up to 24 acquisition times can be added. After adding, click [OK]. Note Always set the time when the computer in which sPSV is set up and the device are both switched ON. The job log is not acquired if the power is not ON. 7 Click [Apply]. When the "Enter an administrator password for the device" window is displayed, enter the administrator password for the device and click [OK]. Note • Depending on the device, this may not be displayed. • For details on the device's factory set administrator password, see the User's Manual of the device. 8 Click [OK] in the confirmation window. - 193 -