Oki B430d-beige smart PrintSuperVision Users Manual - Page 126
Device Password], SNMP Read Community Name], SNMP Trap Port Number], List] to [Device List].
View all Oki B430d-beige manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
7. Registering and Managing Devices [Map] You can visually grasp the setting position by placing the device in the specified image file. For information on how to configure the map settings, see "Registering the Installation Position of Devices Belonging to a Management Group" (P. 223). [Device Password](*) Enter an administrator password for the device (6-12 1-byte alphanumeric characters). [SNMP Read Community Name](*) Enter the SNMP read community name of the device (default: "public") (ASCII code, 0x20 - 0x7E, up to 128 characters) [SNMP Write Community Name](*) Enter the SNMP write community name of the device (default: "public") (ASCII code, 0x20 - 0x7E, up to 128 characters) [SNMP Trap Port Number] Enter the SNMP Trap port number of the device. (default: "162") (1-65535 in single byte numbers) This setting is applied to all devices in the management group on which the [SNMP Trap Port Number] is enabled. 4 Click [Add a device to the management group.]. Memo Click to switch from [Assigned Device List] to [Device List]. 6 Click [OK] to register the device to the group. Note When available usage is set for users or user groups that are registered to management groups, the available usage is enabled for the total amount of usage for users and user groups of all devices that belong to the management group. However, the amount of usage for users who do not have "Include the total usage of the assigned user group." checked is not included. 7 Click [Apply]. 5 S elect the device to add to the group from [Device List], click and switch to [Assigned Device List]. 8 Click [OK] in the confirmation window. - 126 -