Oki C9600n Guide: Software Installation 9600 Series (American English) - Page 12

Macintosh® Installation Network Interface Connection USB Interface Connection IMPORTANT! Before connecting the network cable, install the Ferrite Core. See "1 Install the Ferrite Core" on page 2. • Requires Mac® OS 7.X or above, running on a Macintosh computer with EtherTalk interface. • Ethernet cable is not supplied with the printer. Use an Ethernet crossover cable with RJ45 connectors at either end. 1. Turn the printer OFF. 2. Remove the protective cover from the network connector on the printer. 3. Connect your Ethernet cable to the network port on the printer server. 4. Connect the other end of the Ethernet cable to the network port. • Requires Mac OS 9.04 or higher • Printer operation is not assured if another USB compatible device is connected concurrently with it. • If a USB hub is used, it must be connected directly to the computer. • Depending on the size of the document, if the memory setting for the print monitor is low, you may not be able to print in the background. To correct for this, increase the memory setting for the print monitor. 1. Turn the computer and the printer OFF. 2. Connect the USB cable to the USB port on the computer.C 3. Connect the other end of the cable to the USB port on the printer. 12