Oki ML186 OKI MICROLINE 186 User's Guide - Page 26
a. Remove the access cover., the sprocket wheels to their outermost position
View all Oki ML186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2. Move the paper lever (1) - on the right side of the printer - toward the rear of the printer, to the single sheet symbol. 3. Ensure that the printer is off-line (SELECT light off): press SELECT if necessary. 4. If you are using paper wider than 8.5 inches (216 mm), move the sprocket wheels to their outermost position: a. Remove the access cover. b. Pull the lock levers (A) at either end forward and move the sprocket wheels (B) as needed. 26 • Setting Up Your Printer
26
•
Setting Up Your Printer
2. Move the paper lever (
1
) — on the right side of the printer —
toward the rear of the printer, to the single sheet symbol.
3. Ensure that the printer is
off
-line (
SELECT
light off): press
SELECT
if necessary.
4. If you are using paper wider than 8.5 inches (216 mm), move
the sprocket wheels to their outermost position:
a. Remove the access cover.
b. Pull the lock levers (
A
) at either end forward and move the
sprocket wheels (
B
) as needed.