Oki ML186 OKI MICROLINE 186 User's Guide - Page 36
Setting the Serial Interface Parameters, at the back of the printer
View all Oki ML186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Setting the Serial Interface Parameters Note See underlined items in the table on page 37 for a list of the serial interface defaults. To change the settings for the serial interface, use the two banks of switches on the serial interface board: 1. Turn the printer off. 2. Use a Phillips bit screwdriver to remove the serial switch access cover (1) at the back of the printer: 3. Make any needed changes in the switch banks (SW1 and SW2), See the tables below. 4. Reinstall the access cover and turn the printer on. 36 • Setting Up Your Printer
36
•
Setting Up Your Printer
Setting the Serial Interface Parameters
To change the settings for the serial interface, use the two banks
of switches on the serial interface board:
1. Turn the printer off.
2. Use a Phillips bit screwdriver to remove the serial switch access
cover (
1
) at the back of the printer:
3. Make any needed changes in the switch banks (
SW1
and
SW2
), See the tables below.
4. Reinstall the access cover and turn the printer on.
Note
See underlined items in the table on page 37 for a list
of the serial interface defaults.