Olympus E-1 E-1 Reference Manual (English) - Page 148
Connecting the camera to your computer using the cable
UPC - 050332143913
View all Olympus E-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Connecting the camera to your computer using the cable Connecting the camera to your computer requires the use of the USB cable or IEEE 1394 cable. The camera's PC MODE should be set beforehand to STORAGE. ~ "PC MODE" (P. 133) 1 Insert the cable into the port on your computer. Look for this mark. Terminal Terminal USB port USB IEEE1394 (FireWire) port IEEE1394 Note ● Do not connect both the USB cable and IEEE1394 cable to the camera at the same time. 2 Make sure that the power switch is set to OFF, then insert the cable into the connector on the camera. Transferring images to a computer Smaller terminal IEEE1394: IEEE1394 connector USB: USB connector Smaller terminal 3 Set the camera's power switch to ON. ● Nothing is displayed on the control panel of the camera while it is being connected to the computer. Power switch 11 148