Olympus E-1 E-1 Reference Manual (English) - Page 162
Playing back pictures, Possible cause, Corrective action, Ref.
UPC - 050332143913
View all Olympus E-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Troubleshooting The picture is out of focus. Possible cause Corrective action The subject is too close. Move back to the closest focusing distance for the lens and take the picture. Ref. Page - Subjects are difficult to Take the picture using MF (manual focus) or focus focus on (AF does not work lock. properly). P. 49, 54 The subject is dark. Set AF ILLUMINATOR to ON in the menu. P. 55 There is condensation* in Turn off the camera's power and wait until the - the lens or viewfinder. camera is dry. *Condensation: When it is cold outside, the water vapor in the air is rapidly cooled and turns to droplets of water. Condensation occurs when the camera is suddenly taken from a cold place into a warm room. ⅷ Playing back pictures The picture is blurred. Possible cause Corrective action The camera moved when the shutter button was pressed. Camera vibrations will result in a blurred picture. Hold the camera correctly and press the shutter button gently. When a telephoto lens is used, special care is needed. ISO is set to auto in a dark environment. The camera is more likely to move with slower shutter speeds. Use the flash or set a higher ISO sensitivity. The use of a tripod is also recommended. RELEASE PRIORITY S or RELEASE PRIORITY C is set to ON. The RELEASE PRIORITY S & RELEASE PRIORITY C functions on this camera allow you to release the shutter at exactly the right moment. However, when RELEASE PRIORITY S or RELEASE PRIORITY C is set to ON, the shutter will be released even if the subject is not in focus. Make sure that RELEASE PRIORITY S or RELEASE PRIORITY C is set to OFF or the AF confirmation mark lights on the viewfinder before pressing the button all the way. Miscellaneous The focus mode is set to Take the picture at the point where the AF correct MF. mark lights up when you are turning the focus ring. Or set the focus mode to the AF mode with the 12 focus mode lever set to S or C. Ref. Page P. 28 P. 83, 98 P. 54 P. 51 162