Olympus E-1 E-1 Reference Manual (English) - Page 99
Using the electronic flash, Flash mode P. 100
UPC - 050332143913
View all Olympus E-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Using the electronic flash The following instructions describe how to connect and use the FL-50 electronic flash (optional). Be sure to attach the flash to the camera before turning on the flash's power. 1 Remove the hot shoe cover by sliding it in the direction indicated by the arrow in the illustration. ● Keep the shoe cover in a safe place to avoid losing it, and put it back on the camera after flash shooting. button 2 Attach the FL-50 electronic flash to the hot shoe on the camera. ● If the lock pin is protruding, turn the shoe lock dial as far as it will go in the direction opposite to ß LOCK. This will pull the lock pin back inside. ● For instructions on how to attach the flash, refer to the FL-50's manual. Lock pin Shoe lock dial 3 Turn on the flash. ● When the charge lamp on the flash lights up, charging is complete. ● The flash will be synchronized with the camera at a speed of 1/180 sec or less. Sub dial 4 While holding down the (flash mode) button, rotate the main dial or sub dial 7 to select the desired flash mode. ~"Flash mode" (P. 100) 5 Select the desired flash control mode. 6 Press the shutter button on the camera halfway. ● Shooting information such as ISO sensitivity, aperture value, and shutter speed is communicated between the camera and flash. ● lights up in the viewfinder. Main dial Viewfinder blinks: The flash is charging. 7 Take a picture. lights up: Charging is complete. Flash 99