Olympus E-20 E-20N Reference Manual (English) - Page 143
Selecting conversion lens mode with conversion lens, attached, dial or sub dial until you see
UPC - 050332147980
View all Olympus E-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Selecting conversion lens mode with conversion lens attached When a conversion lens is attached to the camera, switch on the conversion lens mark control panel. in the 1 2 1 Press and hold down the macro button , and then turn the main dial or sub dial until you see the conversion lens mark in the control panel. The display is set as follows. Conversion Lens 3x Extension Lens Tele 300 Pro TCON-300 Control Panel Display 8 blinks Other conversion lenses displayed Conversion lens mark display Control panel 2 Set the zoom position according to the type of conversion lens that you are using. (© 139) Note • The composite f number after the conversion lens is attached to the camera is the same as the f number on the camera, and changes to f2.8 only after the 3x Extension Lens Tele 300 Pro is attached. Please use f2.8 or higher. • When the camera is in the conversion lens mode, AF (automatic focus) is conducted only by the CCD. For more details about the shooting distances and ranges for conversion lenses used with this camera, please refer to the Olympus web site. • When a conversion lens is attached, the camera-to-subject distance (© 68) displayed in the monitor is not correct. 141