Olympus E-20 E-20N Reference Manual (English) - Page 47

With the mode dial set to playback , use the main dial or sub dial to enlarge the image, or switch to the index display and display several images at one time in the monitor. 2 Index Display 1 Frame Display Enlarged Display This feature is convenient when you want to browse the pictures stored on the selected card when you need to find a particular picture. This feature is convenient when you want to confirm that a picture is correctly in focus. 16 frames 9 frames 4 frames 1 frame 2x 3x 4x To return to the shooting mode • When mode dial is set to playback . You cannot press the shutter button to take a picture in the playback mode. In order to resume shooting, set the mode dial to P, A, S, or M. • When mode dial is set to P, A, S, or M. You can just press the shutter button to take a picture. Press the monitor button and wait for the monitor display to go off. Cannot enter playback mode? If the card access lamp is blinking, you cannot enter the playback mode, even after setting the mode dial to playback . When the card access lamp goes off, the camera returns to the playback mode. Monitor blank? The camera will automatically power itself off if it remains idle for a specified length of time. (© 136) The camera will switch on automatically after you start to use the camera again. Limit of the number of playable shot images The maximum number of playable images is 2,000 even if more than 2,000 images are recorded on the card. Caution To avoid damaging the monitor or interfering with the quality of its display, never touch or strike the surface of the monitor. 45