Olympus E-20 E-20N Reference Manual (English) - Page 77
Set the mode dial to, Shutter, priority mode., Turn the main dial or sub dial - e 200
UPC - 050332147980
View all Olympus E-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Slow Fast 2 OFF ON 1 Viewfinder 2 Fast Slow Control panel Shutter speed Shutter speeds of less than 1 second are displayed only with the denominator of the speed setting. For example, the 1/200 sec. selection is displayed as 200. Shutter speeds of more than 1 second are displayed with a doublequote mark ". For example, the 2 sec. selection is displayed as 2". 1 Set the mode dial to S (Shutter priority mode). 2 Turn the main dial or sub dial as shown in the illustration to select a shutter speed. For every movement of the dial, the shutter speed is changed. Setting range: 1/640 - 2 sec. (PS mode: 1/4000 - 2 sec. or 5 1/18000 sec.) The selected shutter speed is displayed in the viewfinder and control panel. The aperture value blinks if the camera cannot set the required aperture size. Aperture value is blinking, and the value is at the maximum? The scene is too bright-the camera cannot make the aperture small enough to expose the shot. Correct the problem by setting a faster shutter speed. If the indication continues to blink, reduce the ISO setting or use a neutral density filter. Aperture value is blinking, and the value is at the minimum? The scene is too dark-the camera cannot open the aperture wide enough to expose the shot. Correct the problem by selecting a slower shutter speed. If the indication continues to blink, raise the ISO setting or use the flash. 3 Take the picture. 75