Olympus E-20 E-20N Reference Manual (English) - Page 178
Connecting the Camera to a Computer, only for Windows Me, Windows 2000, and Macintosh OS9.0 - 9.1
UPC - 050332147980
View all Olympus E-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Transferring Images between the Camera and Computer via a Direct Connection (continued) Connecting the Camera to a Computer (only for Windows Me, Windows 2000, and Macintosh OS9.0 - 9.1) Use the provided USB cable to connect the camera to a personal computer. To prevent the battery from running down while the camera is connected to the computer, check the capacity of the battery before connection. If the battery runs down while transferring image data from the camera to the computer, this could cause loss of image data. Use of the AC adapter to power the camera while the camera is connected to the computer is recommended. While the camera is connected to a computer, the camera does not enter the sleep mode or turn off automatically. 3 OFF ON 2 1 Make sure that the card with the 1 image data that you want to transfer to the computer is selected. The card cannot be switched with the camera mode dial set to (Setup/ Connection mode). To change the card, first disconnect the USB cable, and set the mode dial to another setting. (©181, 182) 2 Open the camera connector cover. B 4 5 A To USB connector 7 OFF ON 6 3 Make sure that the camera power switch is set to OFF. If the camera power switch is set to ON, set it to OFF. 4 Insert connector B of the USB cable into the USB terminal of the camera. 5 Insert connector A of the USB cable into the USB terminal of the computer. 6 Set the camera power switch to ON. 176