Olympus E-330 EVOLT E-330 Advanced Manual (English) - Page 109
Compensating all WB
UPC - 050332157736
View all Olympus E-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Other function settings ISO limit This allows you to set the maximum ISO. Even if the ISO value is fixed in ISO setting, it does not become more than the maximum ISO set in [ISO LIMIT]. MENU[Y][ISO LIMIT] [OFF]/[100]/[200]/[400]/[800] Compensating all WB This lets you apply the same compensation value to all the white balance modes at once. MENU[Y][ALL>] [ALL SET] The same compensation value applies to all WB modes. [ALL RESET] The WB compensation value settings applied to each WB mode are all cleared at once. If you select [ALL SET] 1) Use bd to select the color direction. R-B RedkBlue/G-M GreenkMagenta 7 2) Use ac to set compensate value. "WB Compensation" (g P. 84) • You can check the white balance you have adjusted. If you select [ALL RESET] 1) Use ac to select [YES]. Manual flash Customizing the settings/functions of your camera This allows the built-in flash to output a fixed amount of light. With [MANUAL FLASH] set to [ON], you can set the amount of light (FULL, 1/4, 1/16, or 1/64) in the flash mode setting. MENU[Y][MANUAL FLASH] [ON]/[OFF] Speed synchronization You can set the shutter speed that will be used when the built-in flash fires. The speed can be set from 1/60 to 1/180 in 1/3 EV increments. MENU[Y][#X-SYNC] [1/60]/[1/180] • For details on the synchronization speed of commercially available flashes, refer to their manuals. 109