Olympus E-330 EVOLT E-330 Advanced Manual (English) - Page 33
The aperture value indication does not stop blinking after the shutter - lens
UPC - 050332157736
View all Olympus E-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Advanced shooting modes Display in the viewfinder when the shutter button is pressed halfway Shutter speed Aperture value Shutter speed Aperture value Selecting the right mode for shooting conditions AF AF 2 confirmation confirmation mark mark Exposure mode Viewfinder Exposure mode Viewfinder If the aperture value indication at the minimum value is blinking *, the correct exposure has not been attained (underexposed). Lower the shutter speed. If the aperture value indication at the maximum value is blinking *, the correct exposure has not been attained (overexposed). Raise the shutter speed. * The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens. TIPS The picture looks blurred J The possibility of camera shake spoiling your picture increases greatly during macro or ultra-telephoto shooting. Raise the shutter speed or use a monopod or tripod to stabilize the camera. The aperture value indication does not stop blinking after the shutter speed is changed J If the aperture value indication at the maximum value is blinking, set the ISO sensitivity to a lower value or use a commercially available ND filter (for adjusting the amount of light). g"ISO k Setting the desired sensitivity to light" (P. 78) J If the aperture value indication at the minimum value is blinking, set the ISO sensitivity to a higher value. g"ISO k Setting the desired sensitivity to light" (P. 78) To change the EV step interval: J In the menu, set the EV step interval to 1/3 EV, 1/2 EV or 1 EV. g"EV step" (P. 108) 33