Olympus E-330 EVOLT E-330 Advanced Manual (English) - Page 56
Using commercially available flashes
UPC - 050332157736
View all Olympus E-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Flash shooting Using commercially available flashes Use the M shooting mode on the camera when using any commercially available flash except for the flashes specified for this camera. For details on non-specified commercial flashes, see "Non-specified commercial flashes" (g P. 57). 1 Remove the hot shoe cover to 3 connect the flash unit to the camera. 2 Set the shooting mode to M Various shooting functions mode, then set the aperture value and shutter speed. • Set the shutter speed to 1/180 sec. or slower. If the shutter speed is faster than this, commercially available flashes cannot be used. • A slower shutter speed may produce blurred images. 3 Turn on the flash. • Be sure to turn on the flash after attaching the flash unit to the camera. 4 Set the ISO value and aperture value on the camera to match the flash control mode on the flash. • Refer to the flash's manual for instructions on how to set its flash control mode. x Notes • The flash fires each time the shutter is released. When you do not need to use the flash, turn off the flash's power. • Check beforehand that the flash you are using is synchronized with the camera. 56