Olympus E-330 EVOLT E-330 Advanced Manual (English) - Page 35
The picture looks blurred, To change the EV step interval
UPC - 050332157736
View all Olympus E-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Advanced shooting modes • The exposure level indicator appears on the control panel screen, showing the difference (ranging from -3 EV to +3 EV) between the exposure value calculated by the currently selected aperture and shutter speed compared to the exposure value considered optimum by the camera. Exposure level indicator 2 Underexposure Selecting the right mode for shooting conditions Overexposure Noise in images During shooting at slow shutter speeds of 30 or more seconds, noise may appear on-screen or the image may be overly bright in the top left part of the screen. These phenomena are caused when current is generated in those sections of the image pickup device that are not normally exposed to light, resulting in a rise in temperature in the image pickup device or image pickup device drive circuit. This can also occur when shooting with a high ISO setting in an environment exposed to heat. The noise reduction function helps reduce this noise. g"Noise reduction" (P. 87) Optimum exposure Bulb shooting J You can take a picture with a bulb exposure time in which the shutter stays open as long as you hold down the shutter button (up to 8 minutes). Set the shutter speed to [BULB] in the M mode. Bulb shooting can also be done using an optional remote control (RM-1). g"Bulb shooting on the remote control" (P. 63) TIPS The picture looks blurred J The use of a monopod or tripod is recommended when taking a picture at slow shutter speed. To change the EV step interval: J In the menu, set the EV step interval to 1/3 EV, 1/2 EV or 1 EV. g"EV step" (P. 108) 35