Olympus WS-400S WS-500M Instructions (English, Español, Franç - Page 9
Playback Fig., Setting an index mark or, a temp mark Fig., How to begin segment, repeat playback Fig - voice recorder
UPC - 050332169098
View all Olympus WS-400S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Playback (Fig. 7) " For WS-500M: • When playing back files transferred from a PC, set the mode switch according to the folder type. • When playing back files recorded on the recorder, set the mode switch to [VOICE]. 1 Select the folder which contains the files to be played back. • Pressing the LIST button at the file display during playback or while stopped will return you to the next higher level. Pressing the LIST button repeatedly will bring you to the folder list display. • Pressing button + or − at the folder list display will select the folders for voice recordings and press the OK ` or 9 button. 2 In the File list display, press the + or − button to select the file that you want to playback. • In the File display, press the 9 or 0 button to select a file. 3 Press the OK ` button to start playback. • [6] will appear on the display. a File name b Folder indicator c Playback position bar indicator d Elapsed playback time e File length 4 Press the + or − button to adjust to a comfortable listening volume. • The volume can be adjusted within a range from [00] to [30]. 5 Press the STOP 4 button at any point you want to stop the playback. • [4] will appear on the display. Setting an index mark or a temp mark (Fig. 8) 1 While the recorder is during recording mode or playback mode, press the INDEX/ERASE button. • Even after an index or temp mark is placed, recording or playback will continue so you can place index or temp marks in other locations in a similar manner. Clearing an Index Mark or a Temp Mark (Fig. 9): 1 Locate the index or temp mark youwant to clear. 2 Press the 9 or 0 button to select the index or temp mark to erase. 3 While the index or temp number appears for approximately 2 seconds on the display, Press the INDEX/ERASE button . • The index or temp mark is erased. Note: • Up to 16 index and temp marks can be set in a file. If you try to place more than 16 index or temp marks, [Index Full] message will appear for index marks, and [Temp Mark Full] for temp marks. How to begin segment repeat playback (Fig. p) 1 Select a file that has a segment you would like to play back repeatedly. 2 In the file list display, press the + or − button to select the file you want to clear. 3 Press the OK ` button to start playback. 4 Press the RECs button at the point you want to start segment repeat playback. • [w] will flash on the display. 5 Press the RECs button again at the position where you want to end segment repeat playback. • The recorder repeatedly plays back the segment until the segment repeat playback is cancelled. Note: • As in regular play mode, playback speed can be changed during segment repeat playback as well. If an index mark and temp mark are inserted or eliminated during segment repeat playback, segment repeat playback will be canceled and it will return to regular play mode. Erasing (Fig. q) 1 Select the folder or file you want to erase. 2 In the file list display, press the + or − button to select the file you want to erase. 3. While the recorder is during stop mode, press the INDEX/ERASE button. 4 Press the + button to select [Erase in Folder] or [File Erase]. 5 Press the OK ` button. 6 Press the + button to select [Start]. 7 Press the OK ` button. • The display changes to [Erase!] and erasing will start. • [Erase Done] is displayed when the file is erased. File numbers will be reassigned automatically. Notes: • The locked files and files set as read-only cannot be erased. • If an action is not selected within 8 seconds, the recorder will return to stop status. • It may take over 10 seconds to complete processing. Never remove batteries during this time because data may be corrupted. In addition, replace the batteries with new ones in order to ensure that the batteries will not run out while processing. • For WS-500M only: You can delete other than [Music] folders when the recorder is set to [MUSIC] mode. However, you cannot delete any folders when the recorder is set to [VOICE] mode. • For WS-400S only: You cannot delete folders through therecorder. EN 9