Home » Onkyo Manuals » Audio Amplifiers » Onkyo A-9150 » Manual Viewer

Onkyo A-9150 Owners Manual - English

Onkyo A-9150 Manual

View all Onkyo A-9150 manuals

Add to My Manuals
Save this manual to your list of manuals

Onkyo A-9150 manual content summary:

Onkyo A-9150 | Owners Manual - English - Page 1
INTEGRATED AMPLIFIER A-9150 Instruction Manual Thank you for purchasing an Onkyo Integrated Amplifier. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening
Onkyo A-9150 | Owners Manual - English - Page 2
instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
Onkyo A-9150 | Owners Manual - English - Page 3
you turn it on, so be serviceable. If you cannot turn on the unit, contact sure to use it occasionally. your Onkyo dealer. 3. Care-Occasionally you should 230 V, 50 Hz or AC 120 V, 60 Hz). accordance with the instructions, may cause harmful The power cord plug is used to disconnect this unit
Onkyo A-9150 | Owners Manual - English - Page 4
power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead are coloured in accordance fluctuations and flicker - RoHS Directive, 2011/65/EU WEEE http://www.onkyo.com/manual/weee/weee.pdf Power cord (5.9 ft/1.8 m 1) (Plug type
Onkyo A-9150 | Owners Manual - English - Page 5
Circuiry) • High Current Low Impedance Drive • Optimum Gain Volume • Aluminum Front Panels and Volume Knob • Direct Mode Switch • Newly developed SPECTRA amplifier module • New custom high sound quality 10,000uF capacitor • Designed for sound quality: digital circuit power is shut off when analog
Onkyo A-9150 | Owners Manual - English - Page 6
Introduction Important Safety Instructions 2 Precautions 3 Supplied Accessories 4 Features 5 Before Using the Integrated Amplifier 7 Installing the Batteries 7 Using the Remote Controller 7 Installing the Integrated Amplifier 7 Getting to Know the Integrated Amplifier 8 Front Panel 8 Rear
Onkyo A-9150 | Owners Manual - English - Page 7
fluorescent lights. Keep this in mind when installing. • If another remote controller of the same type is used in the same room, or the integrated amplifier is installed close to equipment that uses infrared rays, the remote controller may not work reliably. • Don't put anything, such as a book, on
Onkyo A-9150 | Owners Manual - English - Page 8
level of treble sounds. ; BALANCE L/R controller (Ä page 24) Adjusts the balance of left and right channels. < DIRECT LED (Ä page 23) Lights when the integrated amplifier is in Direct mode. = DIRECT button (Ä page 19, page 23) Enables or disables the Direct function. Also used when this unit is used
Onkyo A-9150 | Owners Manual - English - Page 9
as Network Audio Player, Onkyo Docks, CD Players, or Tuner with (Remote Interactive) jacks. 3 PHONO (MM/MC) L/R jacks Connect a turntable with analog audio output. 4 GND screw Connects the turntable's ground wire. 5 MAIN IN L/R jacks Connect a pre-amplifier when the integrated amplifier is used as
Onkyo A-9150 | Owners Manual - English - Page 10
integrated amplifier. You can also use the remote controller to control your Onkyo CD Player, Onkyo Network Audio Player, Onkyo Dock, or Onkyo linked. • Refer to the manuals supplied with your Onkyo CD Players, Tuner, Network Audio Player or Docks. ∫ Controlling the Onkyo CD player 2 DIMMER button
Onkyo A-9150 | Owners Manual - English - Page 11
Connecting Terminal LINE1/D1 LINE2/D2 LINE3/D3 Component Button on Remote Controller CD Player TUNER NETWORK AUDIO PLAYER DOCK 1 Í Í Í Í 2 DIMMER DIMMER DIMMER DIMMER D/C D/C D/C (Tuning Up/Down) D/C D/C 3 B/A B/A B/A (Preset Up/Down) ENTER ENTER ENTER ENTER ENTER 4
Onkyo A-9150 | Owners Manual - English - Page 12
Connections The power cord must be connected only after all other cable connections are completed. Connecting Your Speakers Right Left Speakers A Integrated Amplifier Speakers B Right Left ∫ Screw-type speaker terminals Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the
Onkyo A-9150 | Owners Manual - English - Page 13
damage the integrated amplifier. Bi-wiring Connection Bi-wiring provides improved bass and treble performance. Using terminals of both SPEAKERS A and SPEAKERS B, it separates high frequency from low frequency signals. Important: • Bi-wiring can be used only with speakers that support biwiring and
Onkyo A-9150 | Owners Manual - English - Page 14
Analog audio connections (RCA) carry analog audio. R Red To use (Remote Interactive), you need to connect your Onkyo CD Player, Tuner, Network Audio Player, or Dock to the integrated amplifier with an cable. Note • Push plugs in all the way to make good connections (loose connections can cause
Onkyo A-9150 | Owners Manual - English - Page 15
of connection using the CD Player. Digital Connection Integrated Amplifier Analog Connection Integrated Amplifier CD Player 1 Connect an audio pin cable to connect the CD player to the COAXIAL D1 jack. • Refer to "Connecting with Onkyo RI Components" (Ä page 26) to use the RI dock function. Tip •
Onkyo A-9150 | Owners Manual - English - Page 16
connection using the Tuner. Digital Connection Integrated Amplifier Analog Connection Integrated Amplifier Tuner 1 Connect coaxial digital cable to connect the Tuner to the COAXIAL D2 jack. • Refer to "Connecting with Onkyo RI Components" (Ä page 26) to use the RI dock function. Tuner 1 Connect
Onkyo A-9150 | Owners Manual - English - Page 17
Player and Onkyo Dock. Note that when connecting a network audio player and an dock simultaneously, the feature will work with only one of the devices, so connect the cable to the device you have selected to be linked. Analog Connection Integrated Amplifier Digital Connection Integrated Amplifier
Onkyo A-9150 | Owners Manual - English - Page 18
component for instructions on correct use. 1 Use an analog audio cable to connect the PHONO (MM/MC) L/R jacks to the audio output jacks on the turntable, as shown. A shorting pin has been inserted in the PHONO (MM/MC) L/R jack. Remove the shorting pin to connect. Integrated Amplifier Note • Keep
Onkyo A-9150 | Owners Manual - English - Page 19
This is an example of connection using the power amplifier. Integrated Amplifier Using the Integrated Amplifier as a Power Amplifier The integrated amplifier can be used as a power amplifier. This is an example of connection using the Onkyo preamplifier (sold separately). Only the MAIN IN jacks and
Onkyo A-9150 | Owners Manual - English - Page 20
interfere with other electrical equipment on the same circuit. If this is a problem, plug the integrated amplifier into a different branch circuit. • Do not use a power cord other than the one supplied with the integrated amplifier. The supplied power cord is designed exclusively for use with the
Onkyo A-9150 | Owners Manual - English - Page 21
Press ÍON/STANDBY. The SPEAKERS (A/B) and Input source LEDs blink, then light up after a short time. ∫ Operating on the integrated amplifier 1 Press ÍON/STANDBY. The integrated amplifier enters Standby mode and the LED goes off. Tip • After a certain time of warming up, the internal temperature of
Onkyo A-9150 | Owners Manual - English - Page 22
VOLUME  SPEAKERS button A LED B LED 1 Press SPEAKERS repeatedly on the integrated amplifier. The LED of the selected speakers lights. 1 Press VOLUME 3/4 repeatedly. ∫ Operating on the integrated amplifier Note • While headphones are connected, this setting is disabled. • When this
Onkyo A-9150 | Owners Manual - English - Page 23
, the balance can be adjusted even if the Direct function is enabled (Ä page 24). INPUTD/C 1 Press INPUTD/C repeatedly. ∫ Operating on the integrated amplifier INPUT selector DIRECT LED DIRECT button 1 Press the DIRECT button. The DIRECT LED lights. Using the PHASE MATCHING BASS Function From the
Onkyo A-9150 | Owners Manual - English - Page 24
muted: Adjusting the volume or setting the integrated amplifier to Standby will unmute the integrated amplifier. Note • While the Direct function is enabled, bass and treble are disabled. Using Headphones PHONES jack 1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm
Onkyo A-9150 | Owners Manual - English - Page 25
Advanced Operations Custom Setup Setting the Auto Standby Function When the Auto Standby (ASb) function is activated, the integrated amplifier will automatically enter Standby mode if there is no operation for 20 minutes with no audio signal input (Default value: "Off" for North American models, "
Onkyo A-9150 | Owners Manual - English - Page 26
the Onkyo component supported for CD players. • Refer to the instruction manual of the component with the jack for details. * With (Remote Interactive), you can use the following special functions: ∫ Auto Power On When you start playback on a component connected via while the integrated amplifier
Onkyo A-9150 | Owners Manual - English - Page 27
∫ Remote Control You can use the integrated amplifier's remote controller to control your other -capable Onkyo Components, pointing the remote controller at the integrated amplifier's remote control sensor instead of the component. To operate the CD player, point the remote controller at the CD
Onkyo A-9150 | Owners Manual - English - Page 28
cellular phone that's being used to make a call, the integrated amplifier may output noise. Headphone output is intermittent or there's no sound. • This may be due to dirty contacts. Clean the headphones plug. See your headphones' instruction manual for cleaning information. Also, make sure that the
Onkyo A-9150 | Owners Manual - English - Page 29
that will be connected. Please refer to the connection section in the owner's manual of the connected device. The sound from turntable is distorted. • If your or sunlight). • The integrated amplifier is located behind the glass doors of an audio rack or cabinet. Onkyo is not responsible for damages
Onkyo A-9150 | Owners Manual - English - Page 30
(North American) 0.15 W (Other) 0.2 W Dimensions (W × H × D) 435 mm × 139 mm × 331 mm 17-1/8" × 5-1/2" × 13-1/16" Weight 9.2 kg (20.3 lbs) ∫ Audio Inputs Digital Inputs Analog Stereo Inputs 2 (Rear Optical) 2 (Rear Coaxial) LINE1, LINE2, LINE3, LINE4, MAIN IN, PHONO ∫ Audio Outputs Analog
Onkyo A-9150 | Owners Manual - English - Page 31
MEMO En 31
Onkyo A-9150 | Owners Manual - English - Page 32
, Chuo-ku, Tokyo 104-0028 JAPAN http://www.onkyo.com/ 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 http://www.us