Onkyo A-9150 Owners Manual - English - Page 20

Connecting the Power Cord Integrated Amplifier Supplied power cord To an AC wall outlet (Plug type varies from country to country.) AC INLET 1 Connect all of your speakers and components. 2 Connect the supplied power cord to the integrated amplifier's AC INLET. 3 Plug the power cord into an AC wall outlet. Tip • To reduce noise, do not tie signal cables together with the power cable. Wire them so that they are away from each other. • Depending on the country, the integrated amplifier may be polarity-sensitive. In this case, plug the power cord in a way that provides the best sound quality. Note • Never disconnect the power cord from the integrated amplifier while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then the integrated amplifier. • Turning on the integrated amplifier may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the integrated amplifier into a different branch circuit. • Do not use a power cord other than the one supplied with the integrated amplifier. The supplied power cord is designed exclusively for use with the integrated amplifier and should not be used with any other equipment. • Turn the unit's power to standby before disconnecting the power cord from the outlet. En 20