Onkyo A-9150 Owners Manual - English - Page 30

Specifications

Page 30 highlights

Specifications Rated Output Power (North American) (FTC) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 30 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. (FTC) With 4 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 60 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. (JEITA) Output Power (4 ohms, 1 kHz THD 10%) 90 W 2ch Driven (Other) (IEC) 2 ch × 60 W at 4 ohms, 20 Hz - 20 kHz, 2 ch Driven of 0.08 % THD (JEITA) Output Power (4 ohms, 1 kHz THD 10%) 90 W 2ch Driven *Power output specification is for when power supply is 230V. THD+N (Total Harmonic Distortion+N) 0.08 %, 20 - 20,000 Hz (Rated Output Power) Input Sensitivity and Impedance 200 mV/220 kΩ (LINE 1) 4 mV/47 kΩ (PHONO MM) 0.4 mV/120 Ω (PHONO MC) Rated RCA Output Level and Impedance 1 V/500 Ω (PRE OUT) 0.2 V/2.3 kΩ (LINE OUT) Phono Overload 70 mV (MM 1 kHz 0.5 %) 7 mV (MC 1 kHz 0.5 %) Frequency Response 10 Hz - 100 kHz/+1 dB, -3 dB (LINE1, DIRECT) Tone Control Characteristies +10 dB, -10 dB, 100 Hz (BASS) +10 dB, -10 dB, 10 kHz (TREBLE) Signal to Noise Ratio 107 dB (LINE 1 IN, SP OUT, IHF-A) 82 dB (PHONO IN, MM 5mV, SP OUT, IHF-A) 73 dB (PHONO IN, MC 0.5mV, SP OUT, IHF-A) Speaker Impedance 4 Ω - 16 Ω Headphone output Impedance 390 Ω Headphone Rated Output 70 mW (32 Ω, 1 kHz, 10% THD) Power Supply (North American) AC 120 V, 60 Hz (Other) AC 220 - 230 V, 50/60 Hz Power Consumption (North American) 170 W (Other) 160 W No-sound Power Consumption (North American) 35 W (Other) 35 W Standby Mode Power Consumption (North American) 0.15 W (Other) 0.2 W Dimensions (W × H × D) 435 mm × 139 mm × 331 mm 17-1/8" × 5-1/2" × 13-1/16" Weight 9.2 kg (20.3 lbs) ∫ Audio Inputs Digital Inputs Analog Stereo Inputs 2 (Rear Optical) 2 (Rear Coaxial) LINE1, LINE2, LINE3, LINE4, MAIN IN, PHONO ∫ Audio Outputs Analog Stereo Outputs Speaker Outputs Phones LINE OUT, PRE OUT SPEAKER A, B 1 (Front, ø6.3 mm) ∫ Others 1 Specifications and features are subject to change without notice. We will not accept responsibility for damage arising from the connection of equipment manufactured by other En companies. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

30
En
Specifications
Audio Inputs
Audio Outputs
Others
Specifications and features are subject to change without notice.
We will not accept responsibility for damage arising from the connection of equipment manufactured by other
companies.
Rated Output Power
(North American)
(FTC) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 30 watts per channel minimum
RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
(FTC) With 4 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 60 watts per channel minimum
RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
(JEITA) Output Power (4 ohms, 1 kHz THD 10%) 90 W 2ch Driven
(Other)
(IEC) 2 ch × 60 W at 4 ohms, 20 Hz - 20 kHz, 2 ch Driven of 0.08 % THD
(JEITA) Output Power (4 ohms, 1 kHz THD 10%) 90 W 2ch Driven
*Power output specification is for when power supply is 230V.
THD+N (Total Harmonic Distortion+N)
0.08 %, 20 - 20,000 Hz (Rated Output Power)
Input Sensitivity and Impedance
200 mV/220 k
Ω
(LINE 1)
4 mV/47 k
Ω
(PHONO MM)
0.4 mV/120
Ω
(PHONO MC)
Rated RCA Output Level and Impedance
1 V/500
Ω
(PRE OUT)
0.2 V/2.3 k
Ω
(LINE OUT)
Phono Overload
70 mV (MM 1 kHz 0.5 %)
7 mV (MC 1 kHz 0.5 %)
Frequency Response
10 Hz - 100 kHz/+1 dB, –3 dB (LINE1, DIRECT)
Tone Control Characteristies
+10 dB, –10 dB, 100 Hz (BASS)
+10 dB, –10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
107 dB (LINE 1 IN, SP OUT, IHF-A)
82 dB (PHONO IN, MM 5mV, SP OUT, IHF-A)
73 dB (PHONO IN, MC 0.5mV, SP OUT, IHF-A)
Speaker Impedance
4
Ω
– 16
Ω
Headphone output Impedance
390
Ω
Headphone Rated Output
70 mW (32
Ω
, 1 kHz, 10% THD)
Power Supply
(North American)
AC 120 V, 60 Hz
(Other)
AC 220 - 230 V, 50/60 Hz
Power Consumption
(North American)
170 W
(Other)
160 W
No-sound Power Consumption
(North American)
35 W
(Other)
35 W
Standby Mode Power Consumption
(North American)
0.15 W
(Other)
0.2 W
Dimensions (W
×
H
×
D)
435 mm × 139 mm × 331 mm
17-1/8"
×
5-1/2"
×
13-1/16"
Weight
9.2 kg (20.3 lbs)
Digital Inputs
2 (Rear Optical)
2 (Rear Coaxial)
Analog Stereo Inputs
LINE1, LINE2, LINE3, LINE4, MAIN IN, PHONO
Analog Stereo Outputs
LINE OUT, PRE OUT
Speaker Outputs
SPEAKER A, B
Phones
1 (Front, ø6.3 mm)
1